The following have all been retired from our main selection of products. If you have questions about an older product, would like to request documentation, or would like to know the appropriate replacement solution, please contact one of our experts.
-
The 2 Wire Analog Data fiber link card provides a constant bidirectional transmission path in the VF range over fiber.
-
The 4 Wire T1 Fiber Link Card converts an electrical/copper T1 signal and transports it over fiber.
-
The RLH 2-wire DID provides a fiber optic transmission of a Telco DID TRUNK line to a PBX over 2 optical fibers.
-
The RLH 4 Wire 9.6k DDS Fiber Link cards transmits a low speed Digital Data Service (DDS) circuit over Fiber.
-
The Universal HDSL system transmits one 2-pair HDSL1 or HDSL4 line, or up to two 1-pair HDSL2 lines over fiber.
-
The 2 Channel ADSL Fiber Link Card transmits two channels of ADSL copper service over fiber optic cable.
-
The 2 Wire Digital Phone Fiber Link Card transmits a PBX Digital Phone Line to a digital handset over Fiber.
-
This Analog Signal Fiber Link System provides a transmission of up to four independent signals over fiber.
-
The 4 Channel 4~20mA / 0~10VDC System transmits 4 independent analog signals over a single fiber.
-
The 4 Wire Analog Data fiber link card transmits a 600 Ohm voice frequency signal with E&M over fiber.
-
The Gigabit Ethernet Media Converter extends Gigabit Ethernet up to 74 miles over fiber.
-
The RLH iMux Multiplexor System Transports POTS, 4W AUDIO DATA, RS-232, T1, & Fast Ethernet over one Fiber.
-
ADSS fiber cable contains an aramid strength member eliminating the need to lash to a messenger.
-
MTP Fiber Cassettes reduce installation time and cost for an optical network infrastructure.
-
Scorpion 2 Plate Indoor Wall Mount Fiber Patch Panel supports up to 48 Fibers and offers a convenient splicing and patching solution.
-
The Mini Wall Mount Patch Panel provide a cost effective and convenient way to patch fiber cable indoors or outdoors.
-
The Optimum 4RU Rack Mount Patch Panel supports up to 192 fibers, 8 splice trays, and 2 dual cable strain relief kits.
-
This pedestal enclosure includes plywood backboard covers with hex head self-locking system and a padlock hasp, and can come with a preinstalled housing.
-
24″ x 24″ x 16″ Fiberglass enclosure for communication equipment installation outdoors.
-
30″ x 24″ x 16″ Fiberglass enclosure for communication equipment installation outdoors.
-
The Wall Mount DC/DC Converter takes in 12 to 125VDC and provides an isolated 12, 24 or 48VDC power source.
-
A compact switching supply to convert AC power to regulated 48VDC and 12VDC output to power industrial equipment.
-
The 50 Watt AC to 24 VDC power supply is designed for installation in Outside Plant Environments where reliability and longevity are critical.
-
AC/DC High-Density power supplies are for industrial telecom applications where reliable power is necessary.
-
The 24VDC 4.5 Amp Hour DIN mount battery pack is ideal for providing temporary backup power for UPS applications.
-
The 48VDC 1.2 Amp Hour DIN mount battery pack is ideal for providing temporary backup power for low powered electronics.
-
A compact industrial DIN-rail power supply with a universal input of 85-264VAC or 90-375VDC.
-
Industrial 240 and 480 Watt 24 Volt DC Power Supplies for reliable industrial systems and machines.
-
Industrial 240 and 480 Watt 48 Volt DC Power Supplies for reliable industrial systems and machines.
-
A power supply system – 55W 24VDC solar panel with 34AH regulated battery pack and charge controller.
-
A power supply system – 100W 24VDC solar panel with 52AH regulated battery pack and charge controller.
-
D-Pad platform is placed in front of or near high voltage apparatus to provide personal protection for workers.
-
A heavy-duty splice tray with with tie down holes for cable management and tinted see through screw-on cover.
-
Splice holders provide organization of fiber splices and are typically used in small fiber patch panels and compact spaces.
Â