Transmit 4 Digital Inputs Bi-Directionally Over Fiber
The system provides transmission of four (4) independent input signals on each end over fiber optic cable in both directions. Applications include alarm event triggering, building automation, environmental control systems, fire & alarm systems, gate control, traffic signal control equipment, and more. A complete system requires two (2) units, a 24-48VDC power source on each end, and two (2) matching SFP Transceivers.
Each unit features four (4) input terminals, four (4) output relays, a NC/NO alarm contact for system monitoring, and convenient LED indicators to view system status.
- Hardened to operate in -40°F to +158°F (-40°C to +70°C)
- Compact DIN (T35) rail mount enclosure
- Can be powered by 24-48VDC
- Redundant power inputs with polarity reversal protection, 1.5kV isolation
- SFP transceiver interface
- Each output relay is rated for 60 Watts. (Available with NO or NC relays)
- Inputs can sense a Dry Contact closure
- Inputs can accept a DC voltage signal from 12 – 48 Volts (Custom voltage ranges available)
- Each Input is optically isolated, 3.5kV
- Convenient LED status indicators
- Pluggable terminal blocks
- Critical, high voltage, remote or un-manned locations operating 24/7/365
- Limited Lifetime Warranty
- Made in USA
Fiber Connector Type:
SFP Transceiver
Compatibility:
155Mbps SFP Modules
LED:
PWR, STS, LNK, and Inputs 1~4, and (TX) or Outputs 1~4 (RX)
Power Input:
24-48VDC (Polarity Insensitive)
Dual redundant power inputs
Power Consumption:
6 Watts Max
Wire Connectors:
Screw down terminal block, 16-26AWG
Inputs 1-4:
Dry Contact Sensing
Wet: 12-24VDC
Wet: 24-48VDC
Outputs 1-4:
Relay Contacts
Either Normally Open or Normally Closed Relay Contacts
Output Relay Contacts Maximum Rating:
115AC 1.087A 125VA
12VDC 3.000A 36 Watts
24VDC 2.500A 60 Watts
48VDC 1.250A 60 Watts
130VDC 0.462A 60 Watts
250VDC 0.240A 60 Watts
System Alarm Output:
Normally Open / Closed Relay
Relay Response Time:
5ms typical, 10ms maximum
Surge Protection:
Varistors, Automatic resettable fuses
DC Input Isolation:
1.5kV
Construction:
Powder coated steel and aluminum alloy
Mounting Style:
Standard DIN rail (TS-35) mount
Temperature:
-40°C ~ 70°C (-40°F ~ 158°F)
Operating Humidity:
95%
MTBF:
175,000 Hours
Dimensions/Mounting:
H 4.93” x W 2.0” x D 3.93” (not including DIN clip or pluggable connectors)
Standard T-35 DIN rail mounting
BIO-DR-NO-2
BIO-24-NO-2
BIO-48-NO-2
BIO-DR-NC-2
BIO-24-NC-2
BIO-48-NC-2
SFP-155-04-2
SFP-155-30-2
SFP-155-31-2
SFP-155-34-2
SFP-155-20-2
SFP-155-21-2
SFP-155-24-2
SFP-155-25-2
$565.00
Lead Time: 1 to 2 Weeks*
For product questions, volume pricing and/or delivery outside of the US and Canada, please contact sales.
![Temperature](https://www.fiberopticlink.com/wp-content/uploads/product-icons-temperature-300x300.png)
![DIN Mount](https://www.fiberopticlink.com/wp-content/uploads/product-icons-din-300x300.png)
![4 Channel](https://www.fiberopticlink.com/wp-content/uploads/product-icons-4-channel-300x300.png)
![MUX](https://www.fiberopticlink.com/wp-content/uploads/product-icons-mux-300x300.png)
![SFP Optics](https://www.fiberopticlink.com/wp-content/uploads/product-icons-sfp-optics-300x300.png)
![RLH Limited Lifetime Warranty](https://www.fiberopticlink.com/wp-content/uploads/limited-lifetime-warranty-300x300.png)
![Made in USA](https://www.fiberopticlink.com/wp-content/uploads/made-in-usa-300x300.png)
![35+ years of Excellence](https://www.fiberopticlink.com/wp-content/uploads/years-of-excellence-300x300.png)
Ordering
4 Channel Bi-Di Contact Closure SFP
Product configuration | Inputs | Input Type | Outputs | Output Type | Part number | Price | |
---|---|---|---|---|---|---|---|
1 SFP Slot, 4 Digital Inputs - Dry Contact Sensing, 4 Relay Outputs - Normally Open, Powering Voltage 24-48 DC | 4 Digital Inputs | Dry Contact Sensing | 4 Relay Outputs | Normally Open | BIO-DR-NO-2 | $565.00 | |
1 SFP Slot, 4 Digital Inputs - 12-24VDC, 4 Relay Outputs - Normally Open, Powering Voltage 24-48 DC | 4 Digital Inputs | 12~24VDC | 4 Relay Outputs | Normally Open | BIO-24-NO-2 | $565.00 | |
1 SFP Slot, 4 Digital Inputs - 24-48VDC, 4 Relay Outputs - Normally Open, Powering Voltage 24-48 DC | 4 Digital Inputs | 24~48VDC | 4 Relay Outputs | Normally Open | BIO-48-NO-2 | $565.00 | |
1 SFP Slot, 4 Digital Inputs - Dry Contact Sensing, 4 Relay Outputs - Normally Closed, Powering Voltage 24-48 DC | 4 Digital Inputs | Dry Contact Sensing | 4 Relay Outputs | Normally Closed | BIO-DR-NC-2 | $565.00 | |
1 SFP Slot, 4 Digital Inputs - 12-24VDC, 4 Relay Outputs - Normally Closed, Powering Voltage 24-48 DC | 4 Digital Inputs | 12~24VDC | 4 Relay Outputs | Normally Closed | BIO-24-NC-2 | $565.00 | |
1 SFP Slot, 4 Digital Inputs - 24-48VDC, 4 Relay Outputs - Normally Closed, Powering Voltage 24-48 DC | 4 Digital Inputs | 24~48VDC | 4 Relay Outputs | Normally Closed | BIO-48-NC-2 | $565.00 |
- A complete system requires a pair Fiber Link units
- SFP Transceivers are sold separately (see list below)
155M SFP Transceiver
Short description | Mode | Connector | Distance | Fibers | Wavelength | Part number | Price | hf:att:pa_distance | hf:att:pa_fibers | |
---|---|---|---|---|---|---|---|---|---|---|
Multimode, LC, 2km/1.2 miles, Dual Fiber, 1310nm | Multimode | LC | 2km/1.2 miles | Dual Fiber | 1310nm | SFP-155-04-2 | $65.00 | 2km-1-2-miles | dual-fiber | |
Singlemode, LC, 20km/12.4 miles, Dual Fiber, 1310nm | Singlemode | LC | 20km/12.4 miles | Dual Fiber | 1310nm | SFP-155-30-2 | $85.00 | 20km-12-4-miles | dual-fiber | |
Singlemode, LC, 60km/37 miles, Dual Fiber, 1310nm | Singlemode | LC | 60km/37 miles | Dual Fiber | 1310nm | SFP-155-31-2 | $120.00 | 60km-37-miles | dual-fiber | |
Singlemode, LC, 100km/62 miles, Dual Fiber, 1550nm, with Digital Diagnostic Monitoring | Singlemode | LC | 100km/62 miles | Dual Fiber | 1550nm | SFPD-155-34-2 | $280.00 | 100km-62-miles | dual-fiber | |
Singlemode, LC, 20km/12.4 miles, Single Fiber – Side A, Tx1310/Rx1550 | Singlemode | LC | 20km/12.4 miles | Single Fiber - Side A | T-1310/R-1550 | SFP-155-20-2 | $105.00 | 20km-12-4-miles | single-fiber-side-a | |
Singlemode, LC, 20km/12.4 miles, Single Fiber – Side B, Rx1310/Tx1550 | Singlemode | LC | 20km/12.4 miles | Single Fiber - Side B | R-1310/T-1550 | SFP-155-21-2 | $105.00 | 20km-12-4-miles | single-fiber-side-b | |
Singlemode, LC, 60km/37 miles, Single Fiber – Side A, Tx1310/Rx1550, with Digital Diagnostic Monitoring | Singlemode | LC | 60km/37 miles | Single Fiber - Side A | T-1310/R-1550 | SFPD-155-24-2 | $140.00 | 60km-37-miles | single-fiber-side-a | |
Singlemode, LC, 60km/37 miles, Single Fiber – Side B, Rx1310/Tx1550, with Digital Diagnostic Monitoring | Singlemode | LC | 60km/37 miles | Single Fiber - Side B | R-1310/T-1550 | SFPD-155-25-2 | $170.00 | 60km-37-miles | single-fiber-side-b |
- Single fiber (bi-directional) SFP transceivers must always be paired, side A and side B
You May Also Be Interested In
You may also like…
-
155M SFP Transceiver
Small Form Factor Pluggable (SFP) Optical Transceivers certified for use in RLH SFP products.
See DetailsAccessories for Industrial Ethernet Switches155M SFP Transceiver
$65.00 – $280.00 See Details This product has multiple variants. The options may be chosen on the product page -
Industrial AC/DC + DC/DC Switching 48 Watt Power Supply
A compact 48 Watt industrial DIN-rail power supply with a universal input of 100-240VAC/120-370VDC.
See DetailsAC/DC Power SuppliesIndustrial AC/DC + DC/DC Switching 48 Watt Power Supply
$55.00 See Details This product has multiple variants. The options may be chosen on the product page -
DIN Rail Housing
The DIN Rail industrial housing is a steel, powder coated, enclosure with a hinged door for equipment access.
See DetailsAccessories for Ethernet IODIN Rail Housing
$295.00 – $490.00 See Details This product has multiple variants. The options may be chosen on the product page -
Fiber Optic Patch Cords
RLH Fiber optic patch cords are made with Corning® glass. Available with riser or plenum Jacketing and a wide variety of connector and lengths options.
See DetailsFiber Patch CordsFiber Optic Patch Cords
$11.00 – $22.00 See Details This product has multiple variants. The options may be chosen on the product page -
8 Channel Contact Closure SFP
The 8 Channel Contact Closure SFP Fiber Link System transmits 8 signals (Wet or Dry) over fiber.
See DetailsContact Closures8 Channel Contact Closure SFP
$565.00 See Details This product has multiple variants. The options may be chosen on the product page
*Lead times are estimates and may vary. You will be contacted within 1 business day to go over the details of your order. If you require a specific date, let us know!
*Days = Business Days
Warning: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.