Extend Analog Data Circuits with E&M Signaling Over Fiber
Overview
Features
Specs
Docs
Diagrams
Numbers
Overview
The 4 wire data E&M system provides simultaneous transmission of 4-wire data and single or bidirectional E&M over two optical fibers, providing point-to-point isolation of Telco or 4-wire PABX trunk lines using E&M leads.
The 4-wire data supports full duplex constant transmission up to 9600 bps in voice frequency range (300Hz-3.4KHz). 2-wire data is half duplex, and 4-wire data is full duplex. The E&M card interfaces with an E&M input and provides a contact closure on the far end. The cards have convenient E&M input and output status LED indicators.
This fiber link card is designed to be installed into any of the RLH Fiber Link Card Housings, and occupies a single card slot.
Features
- 4 Wire data with E&M function
- Full duplex, constant transmission
- Dual power capable, line or 24-56VDC
- Available in Single or Multimode
- Available with ST or SC Connectors
- Compatible with a wide variety of Card Housings
- Limited Lifetime Warranty
- Made in USA
Specs
Transmission Method:
Frequency modulated light via two optical fibers
Wavelength:
Multimode: 850nm
Singlemode: 1310nm
Fiber Type/Distance:
Multimode (62.5/125µm): 1.2 miles/2km
Singlemode (9/125µm): 9 miles/15km; Long Haul 31 miles/50km
Fiber Connector Type:
ST or SC
Dimensions:
7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm)
(Standard RLH Fiber Link Card Form Factor)
Operating Temperature:
-40˚F to +158˚F (-40˚C to +70˚C)
Operating Humidity:
95% non-condensing
Docs
Diagrams
Numbers
8806-1238-02
8806-1248-02
8805-1238-02
8805-1248-02
8806-1277-01
8806-1287-01
8805-1277-01
8805-1287-01
8806-1277-01-LH
8806-1287-01-LH
8805-1277-01-LH
8805-1287-01-LH
RLH-RJ4W-CO
RLH-RJ4W-SUB
Ordering
4 Wire Data with E&M
| Product configuration | Card Type | Mode | Connector | Distance | Fibers | Part number | Price | hf:att:pa_card-type | hf:att:pa_mode | hf:att:pa_connector | hf:att:pa_distance | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CO Card, Multimode, ST, 2km/1.2 miles, Dual Fiber | CO Card | Multimode | ST | 2km/1.2 miles | Dual Fiber | 8806-1238-02 | $1,180.00 | co-card | multimode | st | 2km-1-2-miles | |
| SUB Card, Multimode, ST, 2km/1.2 miles, Dual Fiber | SUB Card | Multimode | ST | 2km/1.2 miles | Dual Fiber | 8806-1248-02 | $1,180.00 | sub-card | multimode | st | 2km-1-2-miles | |
| CO Card, Singlemode, ST, 15km/9 miles, Dual Fiber | CO Card | Singlemode | ST | 15km/9 miles | Dual Fiber | 8806-1277-01 | $1,440.00 | co-card | singlemode | st | 15km-9-miles | |
| Sub Card, Singlemode, ST, 15km/9 miles, Dual Fiber | SUB Card | Singlemode | ST | 15km/9 miles | Dual Fiber | 8806-1287-01 | $1,440.00 | sub-card | singlemode | st | 15km-9-miles | |
| CO Card, Singlemode, SC, 15km/9 miles, Dual Fiber | CO Card | Singlemode | SC | 15km/9 miles | Dual Fiber | 8805-1277-01 | $1,590.00 | co-card | singlemode | sc | 15km-9-miles | |
| SUB Card, Singlemode, SC, 15km/9 miles, Dual Fiber | SUB Card | Singlemode | SC | 15km/9 miles | Dual Fiber | 8805-1287-01 | $1,590.00 | sub-card | singlemode | sc | 15km-9-miles | |
| CO Card, Singlemode, ST, 50km/31 miles, Dual Fiber | CO Card | Singlemode | ST | 50km/31 miles | Dual Fiber | 8806-1277-01-LH | $1,650.00 | co-card | singlemode | st | 50km-31-miles | |
| Sub Card, Singlemode, ST, 50km/31 miles, Dual Fiber | SUB Card | Singlemode | ST | 50km/31 miles | Dual Fiber | 8806-1287-01-LH | $1,650.00 | sub-card | singlemode | st | 50km-31-miles | |
| CO Card, Singlemode, SC, 50km/31 miles, Dual Fiber | CO Card | Singlemode | SC | 50km/31 miles | Dual Fiber | 8805-1277-01-LH | $1,800.00 | co-card | singlemode | sc | 50km-31-miles | |
| SUB Card, Singlemode, SC, 50km/31 miles, Dual Fiber | SUB Card | Singlemode | SC | 50km/31 miles | Dual Fiber | 8805-1287-01-LH | $1,800.00 | sub-card | singlemode | sc | 50km-31-miles |
- A complete system requires a CO card and a SUB card
- This card is designed to be installed into a Card Housing
You May Also Be Interested In
You may also like…
-
24” x 24” x 16” – Aluminum Enclosure
24″ x 24″ x 16″ equipment enclosure for installation of communication devices outdoors.
See DetailsOutdoor Cabinets24” x 24” x 16” – Aluminum Enclosure
$1,050.00 – $1,260.00 See Details This product has multiple variants. The options may be chosen on the product page -
1RU Slimline Rack Mount Housing
The 1RU Slimline Rack Mount Housing is rack mountable and holds up to (2) Fiber Optic Link Cards.
See DetailsFiber Optic Isolation Systems1RU Slimline Rack Mount Housing
$410.00 – $535.00 See Details This product has multiple variants. The options may be chosen on the product page -
Fiber Link Card Housings – NEBS Level 3
5, 8, or 12 Card Housings can be rack or wall mounted are available with optional integrated power supply.
See DetailsFiber Optic Isolation SystemsFiber Link Card Housings – NEBS Level 3
$680.00 – $1,455.00 See Details This product has multiple variants. The options may be chosen on the product page -
4 Wire Analog Data
The 4 Wire Analog Data fiber link card transmits a 600 Ohm voice frequency signal over fiber.
See DetailsFiber Optic Isolation Systems4 Wire Analog Data
$1,090.00 – $1,710.00 See Details This product has multiple variants. The options may be chosen on the product page
*Lead times are estimates and may vary. You will be contacted within 1 business day to go over the details of your order. If you require a specific date, let us know!
*Days = Business Days
Warning: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.